WHO IS YOUR SALES REP OR DISTRIBUTOR FOR SOUTH AMERICA? CAN WE CONTACT THEM?

Currently we don't have a distributor covering all of South America but you can purchase directly from us on our Diamax global store at http://www.diamaxglobal.com

HAS DIAMAX INDUSTRIES BEEN SOLD?

No. Diamax is and has always been solely owned by brothers Simon and Justin Hong. We have no plans to sell the company.

NECESITO UN DISCO DE CORTE PARA CERAMICA. ESTOY EN ARGENTINA, DONDE LO PUEDO COMPRAR? GRACIAS

HIYA, MANNIE HERE IN AUSTRALIA. I'VE BEEN USING SOME CHEAP CHINESE BLADES THAT KEEP THROWING SEGMENTS ON ME. I'M WONDERING, HOW FAST ARE THEY TRAVELING WHEN THEY HIT ME?

Ha! That's the problem with using inferior tools. Those darned hot metal chunks keep hitting you in the face. From our calculations a 5" blade spinning at 10,000 RPM would have a speed at the exterior edge of about 148 miles per hour. So depending on the conditions those segments would be hitting you pretty fast. You should try one of our Cyclone Turbo blades. It's been proven as one of the most reliable on the market. Also, always, always use eye, face and neck/torso protection when using high speed tools.

I HAVE 25 STONES 5" THICK AND NEED TO CUT CURVED RADIUS ON THE FRONT OF EACH. DO YOU HAVE A DIAMOND BLADE (5") WITH A RECESSED CENTER SO THE NUT WOULD SET BEHIND BLADE FACE? WE CAN CUT DOWN A COUPLE INCHES & BREAK WASTE OFF AND CUT DOWN COUPLE MORE

Mark, our Cyclone contour blade would be perfect for this. It is designed for cutting a radius. I'm assuming you are cutting granite.

DO YOUR DIAMAX CYCLONE POLISHING PADS WORK ON ENGINEERED STONE?

Our new Engineered Stone Pads (ESP4 line) work excellent on Silestone Cambria and Zodiaq

QUE DISO Y QUE R.P.M SON LOS MAS ADECUADO PARA CORTAR MARMOL Y GRANITO NATURAL

WHAT DO YOU HAVE IN NOISE ABATEMENT FOR BLADES FOR CUTTING HARD ROCK?

Our Diamax Cyclone Silent Core blades for granite are designed to cut down on noise. They significantly reduce noise when cutting hard materials like granite. You can see full specs and sizes here: http://www.diamaxinc.com/products.php?product=blades

I NOTICE LOTS OF SPARKS COMING FROM THE DIAMOND BLADES ON YOUR SITE. DO YOUR DIAMOND BLADES SPARK A LOT?

Good question. The sparks on the site were designed to make the site more dynamic and interesting. Of course there is occasional sparking when using a turbo blade, especially with harder stones, but our products are engineered to be the safest and highest performance on the market so sparking is minimal.

WHY ARE YOU DIAMAX CNC WHEELS BETTER THAN WHAT I AM CURRENTLY USING. AS YOU KNOW, SWITCHING IS A BIG DEAL.

Our Diamax CNC Wheels are the only CNC system on the market that will take you though all 7 positions. Most CNC metal positions deform after use, making the final positions not fit the shape any more. So most people are taking their pieces off the machine and finishing them by hand. With our Diamax CNC wheels you don't have to do that so you can get the most out of your CNC investment.

4 1/2 CORE BIT, 50 YEAR OLD POURED CONC. WALL, HORIZINTAL HOLE, CONTINUOUS WATER SQUIRTED IN AT ABT. 30 LB., 200 TO 300 RPM PUSHING IN PRESSURE ABT. 100 TO 150 LB. ACROSS--- BIT GLAZES OVER AND CUTS AT LESS THAN 1/3 OF ORIGONAL SPEED --- WHAT TO DO TO REFRESH END SO CUTTING WILL IMPROVE WITH OUT RUINING BIT?? STILL LOTS OF DIAMOND LEFT.

If you are using our Cyclone 4 1/2 core bit, this bit is designed to work with granite, not concrete. Although concrete is softer than granite, it requires a different type of diamond tool in order to work well. I recommend purchasing a bit specifically designed for concrete. Beyond that, you might want to try a 5 degree orbit. We have found that orbiting the core bit dramatically improves performance. You may need to start with a larger bit and gradually get smaller in order to give you room to orbit the bit.

YOUR TURBO BLADES ARE SEVERAL DOLLARS MORE EXPENSIVE THAN THE CHINESE BLADES I HAVE BEEN USING. WHY SHOULD I SWITCH TO CYCLONE BLADES?

The simple answer is our turbo blades are better. In test conducted by an independent tool testing laboratory, we tested several Chinese blades. None even came close to the performance of our Cyclone or Hurricane blades. See the full test results on this site at Technology/Tool Testing Not only do our diamond blades perform better, but when you use inferior diamond blades, you are risking personal harm with little chance for recourse in the event of an injury. We have been in business for 12 years and have had a reputation for quality from day one. We couldn't do this if our diamond blades were not some of the best and safest on the market.

WHO IS THE GUY ON YOUR WEB SITE AND ADS?

Ha! When we shoot ads, we do them in fabrication shops with real fabricators. So whichever guy you are talking about is a real fabricator in Atlanta that we photographed while he was really working.

WHAT IS THE SETTING FOR THE CYCLONE DRY CORE DRILL BIT IN 1 1/4".

The RPM for our Cyclone Dry Core Bits are: 1 1/4" = 4000 RPM 1 3/8" = 4000 RPM 1 1/2" = 4000 RPM

LOOKING FOR 14", 1 INCH BORE, 95MM THICKNESS BLADES TO CUT NQ CORE. WOULD YOU HAVE THESE? IF SO WHAT IS THE COST TO THE PROVINCE OF ONTARIO IN CANADA. LOOKING FOR ANOTHER SUPPLIER INSTEAD OF POTHIER ENTERPRISES.

You can get our Diamax Cyclone 14" Silent Core blade part number SCC14 from Granquartz Canada.(819) 876-7131

ASK YOUR QUESTION HERE

ASK YOUR QUESTION HERE